# Ask for help

**URL:** http://forum.3dprintbeginner.com/c/ask-for-help/12.md

[Latest](http://forum.3dprintbeginner.com/latest.md) · [Categories](http://forum.3dprintbeginner.com/categories.md) · [Tags](http://forum.3dprintbeginner.com/tags.md)

---

## [How to post a help request topic](http://forum.3dprintbeginner.com/t/how-to-post-a-help-request-topic/18)

<div class="topic-metadata">

**Author:** [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\
**Replies:** 1\
**Last updated:** [October 19, 2022, 9:17pm UTC](http://forum.3dprintbeginner.com/t/how-to-post-a-help-request-topic/18 "2022-10-19T21:17:37Z")

</div>

This is the place to open new topics if you need help with your 3D printer. When you post a new thread, please include as much information as possible. Here’s an example: Descriptive title: Sidewinder X2 not extrudin…

---

## [Ender 3 S1 Pro, klipper connection problem](http://forum.3dprintbeginner.com/t/ender-3-s1-pro-klipper-connection-problem/2465)

<div class="topic-metadata">

**Author:** [@TriFith](http://forum.3dprintbeginner.com/u/TriFith)\
**Replies:** 1\
**Last updated:** [March 9, 2025, 11:52am UTC](http://forum.3dprintbeginner.com/t/ender-3-s1-pro-klipper-connection-problem/2465 "2025-03-09T11:52:20Z")

</div>

Ender 3 S1 Pro HW in stock, rPI gen 4 connected I am trying to install Klipper on my printer. I have installed MainsailOS, flashed the printer with generated firmware. I have uploaded printer.cfg file, but MainsailOS s…

---

## [Support not sticking to Layer](http://forum.3dprintbeginner.com/t/support-not-sticking-to-layer/2373)

<div class="topic-metadata">

**Author:** [@Ajtsa](http://forum.3dprintbeginner.com/u/Ajtsa)\
**Replies:** 0\
**Last updated:** [January 1, 2025, 5:09am UTC](http://forum.3dprintbeginner.com/t/support-not-sticking-to-layer/2373 "2025-01-01T05:09:19Z")

</div>

Dremel 3D45 Dremel Diglab Slicer 1.2.3 Esun filament PETG 1.75 dia, net weight 1 KG, print temp 230 to 250 C, bed temp 70-90 C I am printing a phone stand 75 CM high 75 cm Wide with 60 degree angle, base 83/75 CM, it…

---

## [Printer Z axis binding up when homing](http://forum.3dprintbeginner.com/t/printer-z-axis-binding-up-when-homing/2375)

<div class="topic-metadata">

**Author:** [@jross327](http://forum.3dprintbeginner.com/u/jross327)\
**Replies:** 0\
**Last updated:** [January 1, 2025, 10:57pm UTC](http://forum.3dprintbeginner.com/t/printer-z-axis-binding-up-when-homing/2375 "2025-01-01T22:57:45Z")

</div>

I’m New to all this and someone gave me a Anycubic Vyper because they never could get it to work. I’m using Cura and I’m running v2.4.5 The problem is, The Z axis goes up and down perfectly as long as you do it manual…

---

## [Benches: Things I have to worry about](http://forum.3dprintbeginner.com/t/benches-things-i-have-to-worry-about/2368)

<div class="topic-metadata">

**Author:** [@Dennis](http://forum.3dprintbeginner.com/u/Dennis)\
**Replies:** 0\
**Last updated:** [December 25, 2024, 8:42pm UTC](http://forum.3dprintbeginner.com/t/benches-things-i-have-to-worry-about/2368 "2024-12-25T20:42:25Z")

</div>

I just got a 3D printer for xmas, and I have a tendency to overthink things. The item I’m overthinking right now is a bench or table for the unit. How important is it that the bench not move? Is it it telescope-level cri…

---

## [What Is The Problem In My 3D Printer?](http://forum.3dprintbeginner.com/t/what-is-the-problem-in-my-3d-printer/2362)

<div class="topic-metadata">

**Author:** [@Roboboy](http://forum.3dprintbeginner.com/u/Roboboy)\
**Replies:** 0\
**Last updated:** [December 23, 2024, 11:25am UTC](http://forum.3dprintbeginner.com/t/what-is-the-problem-in-my-3d-printer/2362 "2024-12-23T11:25:36Z")

</div>

Please Help I Have A Problem When I Print An Object On Pronterface The X Axis Stepper Motor Turns Until It Hits The X Axis Endstop Then It Does The Same With The Y And Z Axis Then All The Stepper Motors Stops But There I…

---

## [Klipper for CR10 Smart](http://forum.3dprintbeginner.com/t/klipper-for-cr10-smart/2308)

<div class="topic-metadata">

**Author:** [@Hammer3091](http://forum.3dprintbeginner.com/u/Hammer3091)\
**Replies:** 4\
**Last updated:** [November 13, 2024, 3:02am UTC](http://forum.3dprintbeginner.com/t/klipper-for-cr10-smart/2308 "2024-11-13T03:02:12Z")

</div>

3D Printer Model: Creality CR10 Smart (non-pro) Slicer: Cura Hardware Setup:Current firmware is Marlin. Wanting to switch to Klipper Problem description: No idea what I’m doing (being honest) What I tried: Bare with m…

---

## [Connecting kingroon kp3 to a pc through USB cable](http://forum.3dprintbeginner.com/t/connecting-kingroon-kp3-to-a-pc-through-usb-cable/2353)

<div class="topic-metadata">

**Author:** [@u156531](http://forum.3dprintbeginner.com/u/u156531)\
**Replies:** 0\
**Last updated:** [December 13, 2024, 11:58pm UTC](http://forum.3dprintbeginner.com/t/connecting-kingroon-kp3-to-a-pc-through-usb-cable/2353 "2024-12-13T23:58:21Z")

</div>

Kingroon kp3 USB connection\*: trying to connect the KP3 to my PC through the USB cable. It brings up the display on the KP3 but I can’t seem to access the sd card through my PC. Is there something I need to install on…

---

## [What am I doing wrong?](http://forum.3dprintbeginner.com/t/what-am-i-doing-wrong/2314)

<div class="topic-metadata">

**Author:** [@Soulbound](http://forum.3dprintbeginner.com/u/Soulbound)\
**Replies:** 5\
**Last updated:** [November 12, 2024, 10:46pm UTC](http://forum.3dprintbeginner.com/t/what-am-i-doing-wrong/2314 "2024-11-12T22:46:33Z")

</div>

3D Printer Model: Test towers Slicer: Cura Hardware Setup: Tina2, Quantum3d PVB Black Problem description: The bridges are just not working. I don’t think it is technically stringing, but is definitely stringy. Not eve…

---

## [Lulzbot mini 3 extruder & movement issue](http://forum.3dprintbeginner.com/t/lulzbot-mini-3-extruder-movement-issue/2331)

<div class="topic-metadata">

**Author:** [@sjpark01](http://forum.3dprintbeginner.com/u/sjpark01)\
**Replies:** 2\
**Last updated:** [November 25, 2024, 5:02am UTC](http://forum.3dprintbeginner.com/t/lulzbot-mini-3-extruder-movement-issue/2331 "2024-11-25T05:02:28Z")

</div>

3D Printer Model: Lulzbot mini 3 Slicer: cura le Hardware Setup: printer directly connected to microsoft surface laptop via USB c Problem description: two problems: the extruder won’t stop extruding. if the hot end i…

---

## [Xyz da vinci issues](http://forum.3dprintbeginner.com/t/xyz-da-vinci-issues/2327)

<div class="topic-metadata">

**Author:** [@cosmoc2](http://forum.3dprintbeginner.com/u/cosmoc2)\
**Replies:** 0\
**Last updated:** [November 20, 2024, 6:53am UTC](http://forum.3dprintbeginner.com/t/xyz-da-vinci-issues/2327 "2024-11-20T06:53:21Z")

</div>

3D Printer Model: Slicer: Hardware Setup: Problem description: What I tried: Here’s your message in English: Hello, I own an XYZprinting da Vinci Jr. WiFi Pro 3D printer. At some point, it started displaying a filam…

---

## [AnyCubic I3 Mega Prints Fail](http://forum.3dprintbeginner.com/t/anycubic-i3-mega-prints-fail/2321)

<div class="topic-metadata">

**Author:** [@AlexPaterson](http://forum.3dprintbeginner.com/u/AlexPaterson)\
**Replies:** 1\
**Last updated:** [November 12, 2024, 4:42pm UTC](http://forum.3dprintbeginner.com/t/anycubic-i3-mega-prints-fail/2321 "2024-11-12T16:42:18Z")

</div>

3D Printer Model: AnyCubic I3 Mega Slicer: Cura 5.7.2 Hardware Setup: Controlled by OctoPrint via USB Problem description: What I tried: Initially, I used a custom model, which failed in the same way. I checked Al…

---

## [Ender3 Max Neo Auto Home problem](http://forum.3dprintbeginner.com/t/ender3-max-neo-auto-home-problem/2304)

<div class="topic-metadata">

**Author:** [@Johnll](http://forum.3dprintbeginner.com/u/Johnll)\
**Replies:** 0\
**Last updated:** [October 31, 2024, 9:08am UTC](http://forum.3dprintbeginner.com/t/ender3-max-neo-auto-home-problem/2304 "2024-10-31T09:08:48Z")

</div>

This morning I Autohomed my printer prior to bed leveling, but when the the bed plate reached the rear position it stopped and there was a loud vibrating noise. I turned the printer off but each time I tried again the s…

---

## [Bambu labs omfg how do i start](http://forum.3dprintbeginner.com/t/bambu-labs-omfg-how-do-i-start/2299)

<div class="topic-metadata">

**Author:** [@RS500364](http://forum.3dprintbeginner.com/u/RS500364)\
**Replies:** 1\
**Last updated:** [October 25, 2024, 11:46am UTC](http://forum.3dprintbeginner.com/t/bambu-labs-omfg-how-do-i-start/2299 "2024-10-25T11:46:16Z")

</div>

Where do I start in the picture you can see it is a circular object so in bamboo Labs I opened up a new project I inserted a circular object but I cannot work out how to change the length and the high of it and then make…

---

## [What types of materials can be 3D printed?](http://forum.3dprintbeginner.com/t/what-types-of-materials-can-be-3d-printed/2025)

<div class="topic-metadata">

**Author:** [@johnsmith](http://forum.3dprintbeginner.com/u/johnsmith)\
**Replies:** 0\
**Last updated:** [March 5, 2024, 4:33pm UTC](http://forum.3dprintbeginner.com/t/what-types-of-materials-can-be-3d-printed/2025 "2024-03-05T16:33:34Z")

</div>

What types of materials can be 3D printed?

---

## [Someone who works with raise E2](http://forum.3dprintbeginner.com/t/someone-who-works-with-raise-e2/2296)

<div class="topic-metadata">

**Author:** [@Marc](http://forum.3dprintbeginner.com/u/Marc)\
**Replies:** 0\
**Last updated:** [October 22, 2024, 6:40pm UTC](http://forum.3dprintbeginner.com/t/someone-who-works-with-raise-e2/2296 "2024-10-22T18:40:06Z")

</div>

3D Printer Model: Slicer: Ideamaker 5.1.2 Hardware Setup: Problem description: If I print with the L extruder for 1 hour and for the same object with the R extruder for 2 hours? I do automatically get a wipe tower. But …

---

## [AnyCubic Kobra 2 Plus - When 75% done nozzle hits print and messes it up or breaks it](http://forum.3dprintbeginner.com/t/anycubic-kobra-2-plus-when-75-done-nozzle-hits-print-and-messes-it-up-or-breaks-it/2292)

<div class="topic-metadata">

**Author:** [@SVOhio](http://forum.3dprintbeginner.com/u/SVOhio)\
**Replies:** 0\
**Last updated:** [October 16, 2024, 1:08pm UTC](http://forum.3dprintbeginner.com/t/anycubic-kobra-2-plus-when-75-done-nozzle-hits-print-and-messes-it-up-or-breaks-it/2292 "2024-10-16T13:08:14Z")

</div>

Brand/Model: AnyCubic Kobra 2 Plus - Fairly new - about 40 hours use Slicer: AnyCubic Slicer 1.4 - tried others (Cura, Prusa) but AnyCubics has worked best in my situation UPDATED: Problem : After reaching about 75%…

---

## [Ender 3 neo v2 not moving or extruding please help](http://forum.3dprintbeginner.com/t/ender-3-neo-v2-not-moving-or-extruding-please-help/2289)

<div class="topic-metadata">

**Author:** [@iangomes25](http://forum.3dprintbeginner.com/u/iangomes25)\
**Replies:** 0\
**Last updated:** [October 11, 2024, 6:41pm UTC](http://forum.3dprintbeginner.com/t/ender-3-neo-v2-not-moving-or-extruding-please-help/2289 "2024-10-11T18:41:42Z")

</div>

Ender 3 NEO V2: prusa slicer: \*\*\*\*: bed and extruder are heating up not moving up and down or extruding: I tried resetting the settings turning it off and on again\*\*:

---

## [Printer's IP and patent rights?](http://forum.3dprintbeginner.com/t/printers-ip-and-patent-rights/2287)

<div class="topic-metadata">

**Author:** [@Toonces](http://forum.3dprintbeginner.com/u/Toonces)\
**Replies:** 0\
**Last updated:** [October 11, 2024, 11:28am UTC](http://forum.3dprintbeginner.com/t/printers-ip-and-patent-rights/2287 "2024-10-11T11:28:04Z")

</div>

3D Printer Model: Slicer: Hardware Setup:I’m a bit of a maker, and for a good while now I’ve thought about getting into printing for the fun of it and to see where my ideas go. Recently, I’ve had an idea for what I thi…

---

## [3D for beginner home use](http://forum.3dprintbeginner.com/t/3d-for-beginner-home-use/2285)

<div class="topic-metadata">

**Author:** [@Aroc2226](http://forum.3dprintbeginner.com/u/Aroc2226)\
**Replies:** 1\
**Last updated:** [October 8, 2024, 11:28am UTC](http://forum.3dprintbeginner.com/t/3d-for-beginner-home-use/2285 "2024-10-08T11:28:48Z")

</div>

I know many on here will cringe. My apologies in advance. My wife has been hinting for a few years now on wanting a 3D printer. I personally don’t see a tremendous amount of use for home but I’m assuming there are ple…

---

## [FF 5m pro error issues](http://forum.3dprintbeginner.com/t/ff-5m-pro-error-issues/2283)

<div class="topic-metadata">

**Author:** [@ronbeth](http://forum.3dprintbeginner.com/u/ronbeth)\
**Replies:** 0\
**Last updated:** [October 5, 2024, 3:22pm UTC](http://forum.3dprintbeginner.com/t/ff-5m-pro-error-issues/2283 "2024-10-05T15:22:23Z")

</div>

FF 5m pro Flashprint slicer Getting insufficient RAM when loading models tp printer via wifi. Also happens when loading via thumb drive. Suggestions? Ron

---

## [COREXY - issues with ubl auto leveling](http://forum.3dprintbeginner.com/t/corexy-issues-with-ubl-auto-leveling/2268)

<div class="topic-metadata">

**Author:** [@Molex](http://forum.3dprintbeginner.com/u/Molex)\
**Replies:** 0\
**Last updated:** [September 20, 2024, 1:23am UTC](http://forum.3dprintbeginner.com/t/corexy-issues-with-ubl-auto-leveling/2268 "2024-09-20T01:23:49Z")

</div>

3D Printer Model: PROFORGE 3 makertech Slicer: cura Hardware Setup: not sure Problem description: trying to calibrate running the ubl and the printer with dual extruder will go off bed causing the probe to crash as th…

---

## [K1 MAX ongoing problem](http://forum.3dprintbeginner.com/t/k1-max-ongoing-problem/2264)

<div class="topic-metadata">

**Author:** [@andymor](http://forum.3dprintbeginner.com/u/andymor)\
**Replies:** 0\
**Last updated:** [September 13, 2024, 9:55am UTC](http://forum.3dprintbeginner.com/t/k1-max-ongoing-problem/2264 "2024-09-13T09:55:23Z")

</div>

What is my problem when I try to print anything higher than a coaster.

---

## [Cutting an stl to print](http://forum.3dprintbeginner.com/t/cutting-an-stl-to-print/2252)

<div class="topic-metadata">

**Author:** [@Dukeman3ca](http://forum.3dprintbeginner.com/u/Dukeman3ca)\
**Replies:** 0\
**Last updated:** [September 5, 2024, 1:44pm UTC](http://forum.3dprintbeginner.com/t/cutting-an-stl-to-print/2252 "2024-09-05T13:44:16Z")

</div>

3D Printer Model: bambu A1 Slicer: same Hardware Setup: Problem description: not solid after i slice What I tried: meshmixer Hi, So recently i downloaded a file and it was skp. So i converted it to stl, brough it…

---

## [Update Klipper Kingroon KLP1 230](http://forum.3dprintbeginner.com/t/update-klipper-kingroon-klp1-230/2242)

<div class="topic-metadata">

**Author:** [@Septain21](http://forum.3dprintbeginner.com/u/Septain21)\
**Replies:** 2\
**Last updated:** [August 31, 2024, 10:08pm UTC](http://forum.3dprintbeginner.com/t/update-klipper-kingroon-klp1-230/2242 "2024-08-31T22:08:30Z")

</div>

Good morning I tried to update Klipper on my Kingroon kLP1 230 printer and I now get this error: \`MCU Protocol error This is frequently caused by running an older version of the firmware on the MCU(s). Fix by recompi…

---

## [Hi new to this printing i have an 4 max pro 2.0 full enclosed machine but can't get the bed leveling done](http://forum.3dprintbeginner.com/t/hi-new-to-this-printing-i-have-an-4-max-pro-2-0-full-enclosed-machine-but-cant-get-the-bed-leveling-done/1877)

<div class="topic-metadata">

**Author:** [@Ashebeenyet](http://forum.3dprintbeginner.com/u/Ashebeenyet)\
**Replies:** 1\
**Last updated:** [August 24, 2024, 12:41am UTC](http://forum.3dprintbeginner.com/t/hi-new-to-this-printing-i-have-an-4-max-pro-2-0-full-enclosed-machine-but-cant-get-the-bed-leveling-done/1877 "2024-08-24T00:41:41Z")

</div>

Continuing the discussion from New printer does not work: 3D Printer Model: Slicer: Hardware Setup: Problem description: What I tried:

---

## [Sonic Pad + Vyper](http://forum.3dprintbeginner.com/t/sonic-pad-vyper/1626)

<div class="topic-metadata">

**Author:** [@CeeKay](http://forum.3dprintbeginner.com/u/CeeKay)\
**Replies:** 1\
**Last updated:** [August 24, 2024, 12:36am UTC](http://forum.3dprintbeginner.com/t/sonic-pad-vyper/1626 "2024-08-24T00:36:55Z")

</div>

I have a Vyper and have see online that a few people are using the Sonic Pad to control it with. I’ve followed the guiode in Ricky Impey’s video on configuring the Vyper and the Sonic Pad, but when I go through the ca…

---

## [Which 3d printer in 2024 to print RC cars parts and wheels(flex)](http://forum.3dprintbeginner.com/t/which-3d-printer-in-2024-to-print-rc-cars-parts-and-wheels-flex/2188)

<div class="topic-metadata">

**Author:** [@phjil75615678147684](http://forum.3dprintbeginner.com/u/phjil75615678147684)\
**Replies:** 1\
**Last updated:** [August 24, 2024, 12:34am UTC](http://forum.3dprintbeginner.com/t/which-3d-printer-in-2024-to-print-rc-cars-parts-and-wheels-flex/2188 "2024-08-24T00:34:11Z")

</div>

Hi I am wondering what is the best printer(s) to print RC car parts and flex wheels… in 2024 not too expensive and new (no second hand) capable of printing ABS/PLA/FLEX/PETG spare parts are available and are not half …

---

## [Why does PP filament warp 2 hours after the print starts](http://forum.3dprintbeginner.com/t/why-does-pp-filament-warp-2-hours-after-the-print-starts/1403)

<div class="topic-metadata">

**Author:** [@DylanElking](http://forum.3dprintbeginner.com/u/DylanElking)\
**Replies:** 2\
**Last updated:** [July 26, 2024, 12:27pm UTC](http://forum.3dprintbeginner.com/t/why-does-pp-filament-warp-2-hours-after-the-print-starts/1403 "2024-07-26T12:27:22Z")

</div>

I’m printing with Basf Ultrafuse PP GF30 filament and I’m having issues with it warping. The problem is I get a perfect first layer and everything sticks fine. I come back an hour later and everything is still going perf…

---

## [Artillery SW 4X pro](http://forum.3dprintbeginner.com/t/artillery-sw-4x-pro/2228)

<div class="topic-metadata">

**Author:** [@Guido](http://forum.3dprintbeginner.com/u/Guido)\
**Replies:** 0\
**Last updated:** [August 8, 2024, 1:33pm UTC](http://forum.3dprintbeginner.com/t/artillery-sw-4x-pro/2228 "2024-08-08T13:33:43Z")

</div>

Mijn SW 4X pro doet niets meer. Als ik de printer opstart krijg ik de melding: “Tip: Your system environment is abnormal, please restart the system.” Daaronder staat dan: " Restart firmware." Als ik dat gedaan heb krij…

[Next page](http://forum.3dprintbeginner.com/c/ask-for-help/12.md?page=1)
