# 3d printer models

**URL:** <http://forum.3dprintbeginner.com/t/3d-printer-models/1659>\
**Category:** Uncategorized\
**Created:** [September 22, 2023, 9:43pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659 "2023-09-22T21:43:24Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nathan](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/nathan/32/853_2.png) [@Nathan](http://forum.3dprintbeginner.com/u/Nathan)\
**Post date:** [September 22, 2023, 9:43pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/1 "2023-09-22T21:43:24Z")

</div>

Hello,

I am interested in learning how to 3d print strictly for fun to begin with. Does anybody have advice on brands they like, i know Ender and Creality are popular but then there is qidi and craetbot. Some more extensive than others most seem to be made over seas. Any information would be appreciated.

Thanks in advance

---

<div class="post-metadata">

**Author:** ![DR3D](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/dr3d/32/794_2.png) [@DR3D](http://forum.3dprintbeginner.com/u/DR3D)\
**Post date:** [September 22, 2023, 11:27pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/2 "2023-09-22T23:27:42Z")

</div>

As far as a 3D printer, get an Ender 3 V3 SE. It’s cheap, fast, versatile, new, and the Ender 3s are super popular so there is a lot of info on them.

---

<div class="post-metadata">

**Author:** ![Nathan](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/nathan/32/853_2.png) [@Nathan](http://forum.3dprintbeginner.com/u/Nathan)\
**Post date:** [September 23, 2023, 12:39am UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/3 "2023-09-23T00:39:15Z")

</div>

What if i am looking for sometime that is a bit larger? Am I better off starting smaller and growing knowledge before going bigger?

---

<div class="post-metadata">

**Author:** ![DR3D](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/dr3d/32/794_2.png) [@DR3D](http://forum.3dprintbeginner.com/u/DR3D)\
**Post date:** [September 24, 2023, 7:38pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/4 "2023-09-24T19:38:57Z")

</div>

Honestly, you probably don’t need a bigger printer. Usually people (myself included) think they need big printer, but you’ll be surprised at how big that Ender 3 can print. Not to mention, big printers cannot print as fast because they have to lug around a huge and hevy bed. But, if you still want a big 3D printer, maybe look for a Creality CR-10 or CR-10S. But if you are ok with spending more money, get the Creality K1 Max. But I would recommend getting the Ender 3 V3 SE just so can get the hang of 3D printing and then if you need something bigger, get the CR-10, CR-10S, or K1 Max.

---

<div class="post-metadata">

**Author:** ![Nathan](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/nathan/32/853_2.png) [@Nathan](http://forum.3dprintbeginner.com/u/Nathan)\
**Post date:** [September 24, 2023, 8:02pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/5 "2023-09-24T20:02:44Z")

</div>

Great, thank you for the information it is very helpful. My preference is to buy the right printer the first time around. Hence the bigger one. Plus, it can always be used to generate revenues?

Best regards!

---

<div class="post-metadata">

**Author:** ![Abhi\_3D](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/a/439d5e/32.png) [@Abhi\_3D](http://forum.3dprintbeginner.com/u/Abhi_3D)\
**Post date:** [November 15, 2023, 10:35am UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/6 "2023-11-15T10:35:16Z")

</div>

> [@Nathan](#):
>
> What if i am looking for sometime that is a bit larger? Am I better off starting smaller and growing knowledge before going bigger?

Starting smaller and gradually expanding your knowledge is often beneficial. It allows you to grasp fundamentals, build confidence, and troubleshoot effectively. Beginning with a smaller project provides a solid foundation for tackling larger endeavors in the future.

---

<div class="post-metadata">

**Author:** ![steve](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/s/f19dbf/32.png) [@steve](http://forum.3dprintbeginner.com/u/steve)\
**Post date:** [November 19, 2023, 6:01pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/7 "2023-11-19T18:01:59Z")

</div>

> [@DR3D](#):
>
> Ender 3 V3 SE

question how big does it print looking to make molds for candles and such looking for height. Thanks Steve

---

<div class="post-metadata">

**Author:** ![DR3D](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/dr3d/32/794_2.png) [@DR3D](http://forum.3dprintbeginner.com/u/DR3D)\
**Post date:** [November 19, 2023, 6:16pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/8 "2023-11-19T18:16:36Z")

</div>

220x220x250mm max build Volume.

---

<div class="post-metadata">

**Author:** ![steve](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/s/f19dbf/32.png) [@steve](http://forum.3dprintbeginner.com/u/steve)\
**Post date:** [November 19, 2023, 6:20pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/9 "2023-11-19T18:20:57Z")

</div>

how do they list width, length, height.

---

<div class="post-metadata">

**Author:** ![DR3D](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/dr3d/32/794_2.png) [@DR3D](http://forum.3dprintbeginner.com/u/DR3D)\
**Post date:** [November 19, 2023, 6:38pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/10 "2023-11-19T18:38:26Z")

</div>

Not sure, but it looks like the height is 250.

---

<div class="post-metadata">

**Author:** ![steve](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/s/f19dbf/32.png) [@steve](http://forum.3dprintbeginner.com/u/steve)\
**Post date:** [November 19, 2023, 6:54pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/11 "2023-11-19T18:54:08Z")

</div>

also looking at the Creality Ender 3 Max Neo

---

<div class="post-metadata">

**Author:** ![steve](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/s/f19dbf/32.png) [@steve](http://forum.3dprintbeginner.com/u/steve)\
**Post date:** [November 19, 2023, 8:33pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/12 "2023-11-19T20:33:53Z")

</div>

or this one Creality Resin 3D Printer Halot-Mage, 8K Resolution 10.3" Mono LCD Resin Printer High-Precision Integral Light Dual Z-axis Print Size 8.97x5.03x9.05in

---

<div class="post-metadata">

**Author:** ![steve](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/s/f19dbf/32.png) [@steve](http://forum.3dprintbeginner.com/u/steve)\
**Post date:** [November 19, 2023, 11:13pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/13 "2023-11-19T23:13:05Z")

</div>

Pulled the plug just bought the Creality Ender 3 V3 SE! Thanks DR3D for the advice.

---

<div class="post-metadata">

**Author:** ![Bart22](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/b/919ad9/32.png) [@Bart22](http://forum.3dprintbeginner.com/u/Bart22)\
**Post date:** [November 23, 2023, 12:54pm UTC](http://forum.3dprintbeginner.com/t/3d-printer-models/1659/14 "2023-11-23T12:54:03Z")

</div>

Hi Steve,

I believe it is almost impossible to make the right choice. Instead of watching even more reviews on youtube for days, I finally decided to buy one and move on from there. Hope you going to like at and print a lot and after a lot of experience you will probably know if it was the right choice or what your next printer has to be.
