# Anycubic Kobra Max Review: Big Printer For People with Big Dreams

**URL:** <http://forum.3dprintbeginner.com/t/anycubic-kobra-max-review-big-printer-for-people-with-big-dreams/357>\
**Category:** Latest 3DPrintBeginner Articles\
**Created:** [April 1, 2022, 2:16pm UTC](http://forum.3dprintbeginner.com/t/anycubic-kobra-max-review-big-printer-for-people-with-big-dreams/357 "2022-04-01T14:16:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\
**Post date:** [April 1, 2022, 2:16pm UTC](http://forum.3dprintbeginner.com/t/anycubic-kobra-max-review-big-printer-for-people-with-big-dreams/357/1 "2022-04-01T14:16:44Z")

</div>

Originally published at: [Anycubic Kobra Max Review: Big Printer For People With Big Dreams | 3D Print Beginner](https://3dprintbeginner.com/anycubic-kobra-max-review/)  
   
If you are looking for a large-format FDM 3D printer, then the Anycubic Kobra Max is probably the one you’re looking for. It has a huge build volume, a decent list of features, and an attractive price point which makes it perfect for prop makers. The Kobra Max is the…

---

<div class="post-metadata">

**Author:** ![DTieu1](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/d/779978/32.png) [@DTieu1](http://forum.3dprintbeginner.com/u/DTieu1)\
**Post date:** [June 1, 2022, 7:05pm UTC](http://forum.3dprintbeginner.com/t/anycubic-kobra-max-review-big-printer-for-people-with-big-dreams/357/2 "2022-06-01T19:05:19Z")

</div>

By any chance, can you give me the G code for one of the prints you did on the Kobra Max, wanted to try the printer files in Cura

---

<div class="post-metadata">

**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\
**Post date:** [June 2, 2022, 4:21am UTC](http://forum.3dprintbeginner.com/t/anycubic-kobra-max-review-big-printer-for-people-with-big-dreams/357/3 "2022-06-02T04:21:43Z")

</div>

Unfortunately, I don’t have the g-code files anymore. But if you c[alibrate flow rate](https://3dprintbeginner.com/flow-rate-calibration/), and tune the slicer settings you should be able to get similar results.