# Bambu Studio Fine Tuning: Tips and Tricks for X1 and P1P

**URL:** http://forum.3dprintbeginner.com/t/bambu-studio-fine-tuning-tips-and-tricks-for-x1-and-p1p/1453
**Category:** Latest 3DPrintBeginner Articles
**Created:** [June 2, 2023, 11:38am UTC](http://forum.3dprintbeginner.com/t/bambu-studio-fine-tuning-tips-and-tricks-for-x1-and-p1p/1453 "2023-06-02T11:38:13Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)
#### Post date: [June 2, 2023, 11:38am UTC](http://forum.3dprintbeginner.com/t/bambu-studio-fine-tuning-tips-and-tricks-for-x1-and-p1p/1453/1 "2023-06-02T11:38:13Z")

</div>

Originally published at: [https://3dprintbeginner.com/bambu-studio-fine-tuning-tips-and-tricks/](https://3dprintbeginner.com/bambu-studio-fine-tuning-tips-and-tricks/)  
   
There’s no denying that the Bambu Lab printers are fast and able to produce great print quality. But I noticed that some aftermarket filaments are not as user-friendly when it comes to printing them fast. Most of the time, the printer either prints too fast and the filament can’t keep…

---

<div class="post-metadata">

### Author: ![Eclipsegs621](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/e/ecd19e/32.png) [@Eclipsegs621](http://forum.3dprintbeginner.com/u/Eclipsegs621)
#### Post date: [October 16, 2023, 3:49pm UTC](http://forum.3dprintbeginner.com/t/bambu-studio-fine-tuning-tips-and-tricks-for-x1-and-p1p/1453/2 "2023-10-16T15:49:25Z")

</div>

Great writeup! I am trying to finery e my settings for generic silk pla and was wondering about the adjustments for printing something like a vase with a lot of holes. I tried different volumetric flow adjustments and min later times but can’t seem to get flow and speed in the green

---

<div class="post-metadata">

### Author: ![MitchNC](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/m/ba9def/32.png) [@MitchNC](http://forum.3dprintbeginner.com/u/MitchNC)
#### Post date: [November 11, 2023, 3:02pm UTC](http://forum.3dprintbeginner.com/t/bambu-studio-fine-tuning-tips-and-tricks-for-x1-and-p1p/1453/3 "2023-11-11T15:02:19Z")

</div>

I’ve been trying to absorb all the discussions about settings. I’m very confused about Minimum layer time. I’ve printed many small objects since I got my Bambu, I’m 100% sure that it does not take 8 seconds to print layers, especially towards the end of a print when it’s finishing off details. It absolutely prints these layers in under 1 second.

So what am I missing?

I see people on YouTube printing gorgeous models that look flawless. I want that and I’m willing to work for it.