# Creality CR-10 Smart Pro Review: Capable but Pricey **URL:** \ **Category:** Latest 3DPrintBeginner Articles\ **Created:** [July 15, 2022, 8:56am UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635 "2022-07-15T08:56:09Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\ **Post date:** [July 15, 2022, 8:56am UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/1 "2022-07-15T08:56:09Z")
Originally published at: [Creality CR-10 Smart Pro Review: Capable But Pricey | 3D Print Beginner](https://3dprintbeginner.com/creality-cr-10-smart-pro-review/) Today, we are going to check out the Creality CR-10 Smart Pro, which is the upgraded version of the CR-10 Smart, and this one is quite good. You might have seen my CR-10 Smart review, where I wasn’t really happy with the state of the printer, and it was hard… ---
**Author:** ![MM\_usw](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/mm_usw/32/558_2.png) [@MM\_usw](http://forum.3dprintbeginner.com/u/MM_usw)\ **Post date:** [September 27, 2022, 7:22pm UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/2 "2022-09-27T19:22:37Z")
Thank you very much for your efforts and useful Information you deliver to all of us who are searching for the right 3d printer. May I ask you please, which large 3d printer is better, Creality CR-10 Smart Pro or the Flsun v400 / Speedracer. Because you wrote that cr10 smart pro is probably the best large 3d printer in 2022 but it has only 4 stars in printing aspect on your rating, the flsun v400 has almost 5. Could you please recommend me the best large 3d printer up to 1000 dollars? 🙈😃 ---
**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\ **Post date:** [September 29, 2022, 6:07am UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/3 "2022-09-29T06:07:54Z")
When the article was written, the V400 wasn’t a thing. But the V400 is quite good, so I don’t think you can go wrong with it. It’s much faster than the CR-10 Smart PRo. ---
**Author:** ![MM\_usw](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/mm_usw/32/558_2.png) [@MM\_usw](http://forum.3dprintbeginner.com/u/MM_usw)\ **Post date:** [September 29, 2022, 5:08pm UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/4 "2022-09-29T17:08:37Z")
Thank you very much for your reply, but what is the best fdm 3d printer you tested ? ---
**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\ **Post date:** [September 30, 2022, 10:19am UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/5 "2022-09-30T10:19:00Z")
At the moment, I think the Bambu Lab X1. It just works over and over and over again. ---
**Author:** ![SirPete](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/s/6f9a4e/32.png) [@SirPete](http://forum.3dprintbeginner.com/u/SirPete)\ **Post date:** [May 4, 2023, 10:07am UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/6 "2023-05-04T10:07:08Z")
It’s probably worth adding B&H Photo and Video to the “check the price at” list of links. They sell mostly Creality printers at a slightly lower than average price, sometimes a very good price. ---
**Author:** ![juanmanuel](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/j/8797f3/32.png) [@juanmanuel](http://forum.3dprintbeginner.com/u/juanmanuel)\ **Post date:** [November 28, 2023, 5:38am UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/7 "2023-11-28T05:38:19Z")
Hola, gracias por la review muy buena información, te consulto estoy actualizando mi Cr10 smart con el estrusor sprite pro kit, necesito saber como conectar el CR Touch a la mother board. Podrás darnos ese dato para completar la actualización. Muchas gracias ---
**Author:** ![alephTav](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/alephtav/32/991_2.png) [@alephTav](http://forum.3dprintbeginner.com/u/alephTav)\ **Post date:** [May 1, 2024, 12:33pm UTC](http://forum.3dprintbeginner.com/t/creality-cr-10-smart-pro-review-capable-but-pricey/635/8 "2024-05-01T12:33:38Z")
This appears to be a great printer BUT creality ARE NOT SUPPORTING IT IN 2024 so if you end up with a Bricked board (seems a common occurrence when updating I have noticed) you are kinda stuck for a replacement board cause Creality tell me (in april 2024) that they have no intention of making any more boards for this printer which is madness!! SO if you are thinking of getting one BE WARNED-the replacement boards are no longer in production! I have told Creality they owe it to the community to either support it like they do the Ender 3 and Original CR10 etc OR come up with a replacement board that can be used from a different printer like the CR6 which is a very Similar board.