# How to Install a Magnetic PEI Sheet - Artillery Hornet Print Surface Upgrade

**URL:** <http://forum.3dprintbeginner.com/t/how-to-install-a-magnetic-pei-sheet-artillery-hornet-print-surface-upgrade/303>\
**Category:** Latest 3DPrintBeginner Articles\
**Created:** [February 5, 2021, 10:00pm UTC](http://forum.3dprintbeginner.com/t/how-to-install-a-magnetic-pei-sheet-artillery-hornet-print-surface-upgrade/303 "2021-02-05T22:00:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\
**Post date:** [February 5, 2021, 10:00pm UTC](http://forum.3dprintbeginner.com/t/how-to-install-a-magnetic-pei-sheet-artillery-hornet-print-surface-upgrade/303/1 "2021-02-05T22:00:00Z")

</div>

Originally published at: [https://3dprintbeginner.com/how-to-install-a-magnetic-pei-sheet/](https://3dprintbeginner.com/how-to-install-a-magnetic-pei-sheet/)  
   
The best way to improve your printing experience is to upgrade your print surface and install a magnetic PEI sheet. This upgrade will improve adhesion while also allowing you to easily remove the print once it’s finished. In this article I will show you how I upgraded the stock glass…

---

<div class="post-metadata">

**Author:** ![Phil-91](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/p/bcef8e/32.png) [@Phil-91](http://forum.3dprintbeginner.com/u/Phil-91)\
**Post date:** [May 14, 2022, 9:57am UTC](http://forum.3dprintbeginner.com/t/how-to-install-a-magnetic-pei-sheet-artillery-hornet-print-surface-upgrade/303/2 "2022-05-14T09:57:58Z")

</div>

I replaced the original glass with a Ziflex bed

 ![1642331553185](http://forum.3dprintbeginner.com/uploads/default/original/1X/0f18519c3c686c06c3546d7245ae40c838aff701.jpeg)

I get better first layer and prints