# Image to Gcode: How to make Gcode working?

**URL:** http://forum.3dprintbeginner.com/t/image-to-gcode-how-to-make-gcode-working/1466
**Category:** Software
**Created:** [June 12, 2023, 11:08am UTC](http://forum.3dprintbeginner.com/t/image-to-gcode-how-to-make-gcode-working/1466 "2023-06-12T11:08:03Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Pushkar](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/p/82dd89/32.png) [@Pushkar](http://forum.3dprintbeginner.com/u/Pushkar)
#### Post date: [June 12, 2023, 11:08am UTC](http://forum.3dprintbeginner.com/t/image-to-gcode-how-to-make-gcode-working/1466/1 "2023-06-12T11:08:03Z")

</div>

Hello members,

I have an SVG Image, I have created a Gcode from the image using Grasshopper Rhino 7. For some reason I do not want to use STL model.  
I want to run this Gcode on a Ultimaker s5 machine.  
So I copied the header and end of the Ultimaker s5 Gcode to my Gcode.  
Basically I tried to match my Gcode with a Gcode created by Cura for Ultimaker s5 using a random STL.  
But the problem is machine is not accepting that Gcode. What should be the problem?  
Machine shows the printing has started but does not make any movement.