# Pressure Advance in a style of Marlin K-factor

**URL:** <http://forum.3dprintbeginner.com/t/pressure-advance-in-a-style-of-marlin-k-factor/164>\
**Category:** Klipper\
**Created:** [March 11, 2022, 11:22am UTC](http://forum.3dprintbeginner.com/t/pressure-advance-in-a-style-of-marlin-k-factor/164 "2022-03-11T11:22:31Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kosmak](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/kosmak/32/60_2.png) [@Kosmak](http://forum.3dprintbeginner.com/u/Kosmak)\
**Post date:** [March 11, 2022, 11:22am UTC](http://forum.3dprintbeginner.com/t/pressure-advance-in-a-style-of-marlin-k-factor/164/1 "2022-03-11T11:22:31Z")

</div>

So I was trying to dial in my CF PLA [Pressure Advance](https://www.klipper3d.org/Pressure_Advance.html) and stumbled upon a great script that will help anyone streamline their PA Calibration

I am sure all of you are familiar with the old cube test. If not, [there is a pretty good video from Nero3D](https://www.youtube.com/watch?v=LtG--ev3-4s&t=2s) on this topic.

TL;DR is you basically just print a hollow cube with Klipper script, that changes PA gradually over the Z height. You then have to manually inspect the cube and determine whatever seems the best to you.

 ![cube](http://forum.3dprintbeginner.com/uploads/default/original/1X/5d19eb242cda1e3ebe8f4df66d49cca09ac736a2.jpeg)  
_Example of PA cube print_

My main issue with the cube test is the time spent.  
Having to slice, print and measure accurately every single time I want to change filament gets annoying real fast.  
Knowing this amazing [Voron print tuning guide](https://github.com/AndrewEllis93/Print-Tuning-Guide#pressure-advance) I quickly remembered that there was a script that lets you use Marlin K-factor style of calibration with Pressure advance.

So I scrolled down to PA tuning and noticed a link for [this script](https://realdeuce.github.io/Voron/PA/pressure_advance.html).

I quickly filled out all the options **Specific to my V-core 3 400** _please dont blindly copy my values, they will definitely not be accurate for your printer_

 ![example](http://forum.3dprintbeginner.com/uploads/default/original/1X/2494c8eb70ab943c06c53ec9b941a1a8fa3584dc.png)

**REMEMBER YOU NEED TO SET PRINTING TEMPERATURES IN THE START G-CODE IF YOU ARE NOT COMFORTABLE WITH THAT, YOU CAN USE AN ALTERNATIVE SITE**

[**Alternative site**](https://advanced3dprinting.com/linear-advance-tool-klipper/)

After doublechecking all the values and start g-code I proceeded to download and upload to Mainsail.

 ![PA1](http://forum.3dprintbeginner.com/uploads/default/original/1X/29f10cc165716be1acbd35362da70a0873a2b642.jpeg)

My first print was a _complete failure_ but it was a good proof of concept and confirmed that all my values _except for the PA range_ were correct

So I quickly adjusted the settings and reprinted it

 ![PA2](http://forum.3dprintbeginner.com/uploads/default/original/1X/4ca2af7bbe67d3fcb0ffcde4efb672be29f9435b.jpeg)

And now as you can see, this is a good range in which to operate with the values.  
After a quick inspection I decided on a value of 0.025 for this filament.

And thats it. Now every time I need to get a new PA value for any filament that prints at around 220°C I can just reuse this script and have determined my PA value in 5 minutes instead of within half an hour.
