# Sidewinder X1 upgrade target -\> 100 mm/s
**URL:** http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624
**Category:** Artillery 3D
**Created:** [July 11, 2022, 7:27pm UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624 "2022-07-11T19:27:29Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@wid](http://forum.3dprintbeginner.com/u/wid)
#### Post date: [July 11, 2022, 7:27pm UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/1 "2022-07-11T19:27:29Z")
Hello all,
I do many modification in the past on my X1 (PEI, Mellow aero Wind, Z mods, spool..) and my new target is to print clean and fast on it (100 mm/s).
I upgrading the bed with 2 linear rails and 4 guides, silicone mount and the PEI.
I upgrading the extruder with linear rail (1 or 2 i don’t know).
I don’t touch the Z because i don’t think it’s necessary.
I install a SKR 1.4 turbo board with TMC2209 v1.2 and UART mode (i wait wifi module ESP01s and sutdown module v1.2) and i have a TFT35 v3 to install, Marlin etc.
Did you think that was complicated to print at 100 mm/s with this configuration ? Or i need to install other firmware/hardware ?
i think buy this extrudeur kit for win some grams [Trianglelab – extrudeuse à commande directe, pour V6 HOTEND creality 3D Ender3/pro Ender5 CR10 CR10S BLv | AliExpress](https://fr.aliexpress.com/item/1005003763120461.html?spm=a2g0o.store_pc_groupList.8148356.55.7b096300tKa75n&pdp_npi=2%40dis%21EUR%21%E2%82%AC%2099%2C63%21%E2%82%AC%2097%2C64%21%21%21%21%21%400b0a050b16575608116582010ebdce%2112000027082773487%21sh)
my Mellow aero Wind kit weigh 551gr.
The printer before beginning SKR modifications
---
### Author:  [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)
#### Post date: [July 12, 2022, 4:54am UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/2 "2022-07-12T04:54:14Z")
I can’t see Klipper mentioned there, so if you really want to speed things up, that’s the next logical step.
Spoken like a true Vulcan 😃
---
### Author:  [@wid](http://forum.3dprintbeginner.com/u/wid)
#### Post date: [July 12, 2022, 5:36am UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/3 "2022-07-12T05:36:30Z")
Yes, all the people said that to me for a real evolution of speed.
I have a Rasp Pi 3 somewhere in the house 😅 but i don’t have a computer with linux 🙄
And with Klipper i don’t need to install the TFT35 ? So i can install the Rasp in that place 🤔 and i need a little tv or computer screen 🤔
---
### Author:  [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)
#### Post date: [July 12, 2022, 6:36am UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/4 "2022-07-12T06:36:36Z")
The Pi is enough. You can use any web broweser to control the printer, from a computer or a phone.
---
### Author:  [@wid](http://forum.3dprintbeginner.com/u/wid)
#### Post date: [July 12, 2022, 11:57am UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/5 "2022-07-12T11:57:52Z")
Ok, thanks for your answer.
What do you think about the DDE-O V2 of Trianglelab in link before ?
[Trianglelab – extrudeuse à commande directe, pour V6 HOTEND creality 3D Ender3/pro Ender5 CR10 CR10S BLv | AliExpress](https://fr.aliexpress.com/item/1005003763120461.html?spm=a2g0o.store_pc_groupList.8148356.55.7b096300tKa75n&pdp_npi=2%40dis%21EUR%21%E2%82%AC%2099%2C63%21%E2%82%AC%2097%2C64%21%21%21%21%21%400b0a050b16575608116582010ebdce%2112000027082773487%21sh)
I like the compact design, it’s light, bimetal heatbreak insteed of the allmetal, 3dtouch of TL direct mount and it would be a good extruder for me 🙂
And this nozzle for print at 100mm/s with good flow [BondTech Buse CHT Laiton Nickelé M6 x 1,75 mm - 3DJake France](https://www.3djake.fr/bondtech/buse-cht-laiton-nickele-m6-x-175-mm)
---
### Author:  [@wid](http://forum.3dprintbeginner.com/u/wid)
#### Post date: [July 13, 2022, 9:50am UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/6 "2022-07-13T09:50:43Z")
Hello,
I finaly chose my extruder and parts.
I order a DDE-S kit from Trianglelab (Sherpa mini) and a Slice Engineering Copperhead with a Bondtech CHT nozzle
I take same HB et Nozzle for put in the Obsidian 🙂
Now let’s go for installing the linear rail for the bed 😉
Have a good day.
---
### Author:  [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)
#### Post date: [July 13, 2022, 10:22am UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/7 "2022-07-13T10:22:43Z")
Why not install Klipper first then see if there’s a noeed for other upgrades?
The stock firmware won’t allow you to print faster even if you add other upgrades that you mentioned.
---
### Author:  [@wid](http://forum.3dprintbeginner.com/u/wid)
#### Post date: [July 13, 2022, 10:49am UTC](http://forum.3dprintbeginner.com/t/sidewinder-x1-upgrade-target-100-mm-s/624/8 "2022-07-13T10:49:49Z")
The bed modification is for “no maintenace” and movement more smooth.
The last modification would be linear rail for extruder, and after i hope to have a printer more fast and durable (i don’t have any problem on it since 2019, just the original extruder and gears on the Mellow Wind).
It’s an occupation too and a test for me for see if what i think is good or not 😉