# Sovol Filament Dryer Review: Does it really work?
**URL:** http://forum.3dprintbeginner.com/t/sovol-filament-dryer-review-does-it-really-work/258
**Category:** Latest 3DPrintBeginner Articles
**Created:** [September 30, 2021, 9:00pm UTC](http://forum.3dprintbeginner.com/t/sovol-filament-dryer-review-does-it-really-work/258 "2021-09-30T21:00:00Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)
#### Post date: [September 30, 2021, 9:00pm UTC](http://forum.3dprintbeginner.com/t/sovol-filament-dryer-review-does-it-really-work/258/1 "2021-09-30T21:00:00Z")
Originally published at: [Sovol Filament Dryer Review: Does It Really Work? | 3D Print Beginner](https://3dprintbeginner.com/sovol-filament-dryer-review/)
In a past article, I shared how I dry my filament using a regular oven. But filament dryers started to get more popular and Sovol sent me their Filament Dryer to review. Let’s put it to work, and see how well it performs. Shipping and Packaging The Sovol Filament Dryer…
---
### Author:  [@Parazyt](http://forum.3dprintbeginner.com/u/Parazyt)
#### Post date: [October 3, 2024, 6:30pm UTC](http://forum.3dprintbeginner.com/t/sovol-filament-dryer-review-does-it-really-work/258/2 "2024-10-03T18:30:36Z")
Hello,
I read carefully the test of the Sovol filament dryer I purchased.
thanks again for the clear information.
i never get below 15% humidity with ten or so sachets of scilice.
so i put a little hygrometer thermometer. curiously i don’t have the same values.
see the photo after about 20 hours of drying.
i left the plugs open on purpose to release the humidity.
is it possible to explain such differences?
thank you for helping me to understand.
