# VORON Trident FYSETC Kit Review: Is it worth it?

**URL:** <http://forum.3dprintbeginner.com/t/voron-trident-fysetc-kit-review-is-it-worth-it/318>\
**Category:** Latest 3DPrintBeginner Articles\
**Created:** [March 24, 2022, 1:47pm UTC](http://forum.3dprintbeginner.com/t/voron-trident-fysetc-kit-review-is-it-worth-it/318 "2022-03-24T13:47:15Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\
**Post date:** [March 24, 2022, 1:47pm UTC](http://forum.3dprintbeginner.com/t/voron-trident-fysetc-kit-review-is-it-worth-it/318/1 "2022-03-24T13:47:15Z")

</div>

Originally published at: [https://3dprintbeginner.com/voron-trident-fysetc-kit-review/](https://3dprintbeginner.com/voron-trident-fysetc-kit-review/)  
   
That’s right! I built a VORON. FYSETC sent me their VORON Trident 350 Kit to review, and in this article, we’ll go into detail to learn more about how good this kit is, and what was my experience putting it together. Before we start, I need to share a bit…

---

<div class="post-metadata">

**Author:** ![Choyado](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/c/bc79bd/32.png) [@Choyado](http://forum.3dprintbeginner.com/u/Choyado)\
**Post date:** [January 12, 2023, 4:25am UTC](http://forum.3dprintbeginner.com/t/voron-trident-fysetc-kit-review-is-it-worth-it/318/2 "2023-01-12T04:25:50Z")

</div>

I’m having trouble even getting PETG to extrude. It jams up quickly. What fan did you use to replace the hotend fan?

---

<div class="post-metadata">

**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\
**Post date:** [January 12, 2023, 7:27am UTC](http://forum.3dprintbeginner.com/t/voron-trident-fysetc-kit-review-is-it-worth-it/318/3 "2023-01-12T07:27:58Z")

</div>

I used this one if I remember correctly: [https://s.click.aliexpress.com/e/\_DCG1Cz1](https://s.click.aliexpress.com/e/_DCG1Cz1)  
It’s a Sunon 24V 4010  
This one should also work well: [https://s.click.aliexpress.com/e/\_DEuTgWT](https://s.click.aliexpress.com/e/_DEuTgWT)

---

<div class="post-metadata">

**Author:** ![Choyado](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/c/bc79bd/32.png) [@Choyado](http://forum.3dprintbeginner.com/u/Choyado)\
**Post date:** [January 15, 2023, 5:38pm UTC](http://forum.3dprintbeginner.com/t/voron-trident-fysetc-kit-review-is-it-worth-it/318/4 "2023-01-15T17:38:51Z")

</div>

Hmm. I haven’t tried a that particular fan. I bought another on Amazon but it doesn’t seem to puch much more air. I even printed a shroud to push the air over the heartbreak more directly. I’m having major clogging issues with all materials including ABS. It will run for 20 minutes or so and then it heat soaks and clogs.

---

<div class="post-metadata">

**Author:** ![3DPrintBeginner](http://forum.3dprintbeginner.com/user_avatar/forum.3dprintbeginner.com/3dprintbeginner/32/3_2.png) [@3DPrintBeginner](http://forum.3dprintbeginner.com/u/3DPrintBeginner)\
**Post date:** [January 16, 2023, 11:13am UTC](http://forum.3dprintbeginner.com/t/voron-trident-fysetc-kit-review-is-it-worth-it/318/5 "2023-01-16T11:13:48Z")

</div>

You need a fan that generates a lot of airflow, and some Amazon fans are not that great.