# Xyz da vinci issues

**URL:** <http://forum.3dprintbeginner.com/t/xyz-da-vinci-issues/2327>\
**Category:** Ask for help\
**Created:** [November 20, 2024, 6:53am UTC](http://forum.3dprintbeginner.com/t/xyz-da-vinci-issues/2327 "2024-11-20T06:53:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![cosmoc2](http://forum.3dprintbeginner.com/letter_avatar_proxy/v4/letter/c/c37758/32.png) [@cosmoc2](http://forum.3dprintbeginner.com/u/cosmoc2)\
**Post date:** [November 20, 2024, 6:53am UTC](http://forum.3dprintbeginner.com/t/xyz-da-vinci-issues/2327/1 "2024-11-20T06:53:21Z")

</div>

- **3D Printer Model** :
- **Slicer** :
- **Hardware Setup** :
- **Problem description** :
- **What I tried** :

Here’s your message in English:

* * *

Hello,

I own an XYZprinting da Vinci Jr. WiFi Pro 3D printer. At some point, it started displaying a filament jam error whenever it reached a specific height during printing. I’ve checked everything. I disassembled and reassembled the print head and the motors, but I couldn’t figure out the cause of the issue. Since there’s no service available in my country, I was about to give up and discard it, but I decided to try printing with different software as a last resort.

I used Cura, and the printer worked fine without the filament jam error. However, I’m now facing issues with print quality. I’ve attached a photo for reference.

Does anyone have any suggestions, either for the original problem or for improving the print quality?

Thank you in advance!

* * *

 ![IMG_20241120_080718](http://forum.3dprintbeginner.com/uploads/default/original/2X/7/739d5f11b0d48029e061160e04fbff6d5e72fdda.jpeg)
