Filament is Leaking from Brand New Nozzle

Ask for help
1

Anycubic 4 Max pro 2.0
Cura

I have just Received a Brand new 3D Printer Hot End Suitable for my Printer, and the Filament is Leaking from the Nozzle. I have tightened the Nozzle to the Hot End as tight as I can, But Still the Filament is leaking.

I have Tried to Tighten the nozzle to the Hot End, I have Watch the tutorial on hot to replace hot end.

IMG_7619
IMG_76191575×2100 215 KB

2

IMG_7620
IMG_76201575×2100 161 KB

3

Sometimes, a small piece of filament can get stuck and cause leakage. so it could be a blockage you can try using a thin needle or a cleaning filament to clear it out gently. lemme know if this helps
https://3dprinterchat.com/dealing-with-filament-leakage-from-your-3d-printer-hot-end-heres-what-you-can-do/