Ye, im stuck on the same thing…setting it to USB does not work btw.
Ahhhhaaaa!!!
Got it!
in the guide it says to follow the fluidd install guide and then follow the Ender 6 guide…
Does not work, you end up in “RESERVE_PINS Hell”.
What i did to solve it…yes this is convoluted and alot of trial and error…hours >.<
Any who,
install KIAUH
edit/create “klipper_repos.txt.example”
comment out all the klipper lines.
Add this line instead: desuuuu/klipper,dgus-reloaded
run kiauh REMOVE EVERYTHING.
Install klipper (will now get it from the correct repo for us :))
install moonraker
Install Fluidd (if you want to follow the guide)
IMPORTANT THIS IS WHAT WORKED.
In kiauh hit 4 (advanced menu)
Number 2 (Build only) This will build your firmware (basically the same as makemenu and make, but this works without failing due to the RESERVE_PINS error.).
Update the screen as per the guide.
Voila!
Fully (almost) working Ender 6 with klipper.
I got most stuff working…Buuuuut…BL-Touch >.<