This is the place to open new topics if you need help with your 3D printer.
When you post a new thread, please include as much information as possible. Here’s an example:
- Descriptive title: Sidewinder X2 not extruding filament
- 3D Printer Model: Sidewinder X2
- Slicer: Prusa Slicer
- Hardware Setup: Stock printer with bi-metal heat break upgrade
- Problem description: The printer doesn’t extrude filament anymore after a 20 hour print using PETG printed at 240C for the hotend and 70C for the heatbed.
- What I tried: I did a cold pull to try and unclog the hotend, but the issue persists.
It takes a few extra minutes to create a post, but it will save other a lot of time, and it will make answering questions a lot easier.