Bambu Lab X1-Carbon

FDM 3D Printers
23

I used eastman’s “Pirate and His Rat” bust as a comparison test print. One of the models is printed in ~6 hours while the other one was printed in ~27 hours.
Same settings - 0.16 mm layer height, 10% infill, 2 walls.
Printed on SnapmakerA350T and BambulabGlobal X1-Carbon.
Print Quality Comparison X1 and A3502
Print Quality comparison1
Print Quality comparison2
Print Quality comparison3
Print Quality comparison4
IMG_4610_result
IMG_4611_result
IMG_4612_result
IMG_4613_result
Print Quality Comparison X1 and A3501

2 Likes